57 Series Coalescing Filters

57 Series Coalescing Filters Aluminum

Our high efficiency coalescing compressed air & gas filters are designed for versatility. They are 100% machined, completely anodized, one-piece bowl, and a captured Buna-N O-Ring.

C grade element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element.

Coalescing elements should always flow from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates.

The Flow Rates are based upon our 70C grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70C elements are rated at 95% removal against 0.01 microns.

57 Series Stainless Steel Coalescing Filters

Series 57T Stainless Steel housings are constructed entirely of 316L stainless steel and are free of welds to comply with NACE MR-01-75. All housings come with Viton Seals and a Coalescing Filter Element.

C grade filter element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element.

Coalescing elements flow direction is from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates.

The Flow Rates are based upon our 70C grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70C elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

57 Series High Pressure Compressed Gas Filter for Alternative Fueling Stations

The 57AFS Series is specially designed for high pressure compressed gas coalescing filtration. These housings are rated for 5,700 PSIG and manufactured to ASME B31.3 specifications. The UHPC–SL Series is machined of carbon steel and completely coated with nickel/chrome plating for rust protection.

The Flow Rates are based upon our 70CS grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 57E-SL elements are rated at 95% removal against 0.01 microns. Above each section is the element size.