BSM Rotary Gear Pumps

Features

• Design: Drive speeds to 1800 rpm; discharge pressures to 200 psi; flow rate to 32.0 gpm; foot or flange mounted; with or without integral relief valve.
• Material: Cast Iron casings with precision machined, heat treated gears and case hardened shafts. Pumps are also available in Ductile Iron and Steel.
• Bearings: Replaceable iron sleeve bearings. Also available with carbon graphite or bronze bearings.
• Seal: Mechanical seal. Also available with compression packing or lip seal. Mechanical seal and lip seals available with different elastomers for pumping different types of liquids.
• Lubrication: Self lubricating using the pumped liquid. Also available for handling non-lubricating liquids.
• Rotation: Pumps are available for clockwise or counterclockwise rotation. Discharge is always on the side of the pump toward which the top of the shaft rotates. Specify at time of order.
• Liquid Viscosities: 32 ssu to 100,000 ssu. Adaptable for handling liquids from water soluble to molten lead.
• Suction Lift: 28″ Hg / 31 feet depending on the type of liquid being pumped.
• Drive Options: E-Drive (pump close coupled to motor); A-Drive (pump connected to c-face motor with adapter bracket and coupling); D-Drive (pump coupled to motor mounted on baseplate);GR-Drive (pump coupled to gear reducer coupled to motor mounted on baseplate); B-Drive (pump and motor connected by V-belt and pulleys mounted on baseplate).
• Accessories: Repair Kits; Gear Sets; Bearing Kits; and Seal Kits.

Dimensions

Operating Characteristics

C-Face Mounted Pump Set Dimensions