(603) 577-8707
Contact Us

Lakos Filtration Solutions

flexible-banner-image

Industrial Fluid Filtration Solutions

  • Pre-Filtration
  • Heat Exchanger Protection
  • Waste Reduction
  • Spray Nozzle Protection
  • Prevent Solids Accumulation in Sumps and Basins

Get a Quote

How does the Lakos Separator Work?

Pre-Filtration
Protect Heat Exchangers
Protect Spray Nozzles
Prevent Solids Accumulation in Sumps & Basins

Using a LAKOS Separator as a pre-filter prior to finer filtration improves
efficiency and minimizes liquid loss. As a result:

  • Reduce disposal cost
  • Minimize labor, maintenance downtime and filter media replacement costs
  • Extend the life of finer filtration and water treatment systems
  • Increase the life of filter cartridges and bags and eliminates water treatment processes
Tri-Shield-Liquid-Depth-Filter-Cartridge

LAKOS Separators offer effective protection for heat exchangers against
fouling. As a result:

  • Maintain design efficiencies for better heat transfer rates = energy savings
  • Reduce maintenance frequency for heat exchanger equipment
  • Remove suspended grit and scale
Protect-Heat-Exchangers

LAKOS Separators removes solids that clog spray nozzles and other small
orifices. This helps to:

  • Maintain original nozzle design for efficient spray coverage
  • Prevent wear abrasion and clogging – reducing frequency of nozzle replacement
  • Maintain overall product quality through cleaner nozzles, reducing the need to scrap product due to quality
Protect-Spray-Nozzles

Using a LAKOS Separator as part of your process cooling system minimizes
accumulation of solids that typically settle in sumps and basins. As a result:

  • Fewer shutdowns
  • Reduces solids build-up and decreases clean out time
  • Avoids solids-induced microbial growth, decreases chemical use, and increases process liquid life
Sumps-and-Basin-Cleaning
ISF1
ISF2

ISF Self Cleaning Screen

Self-Cleaning Industrial Pump Intake Screen

Flow Range: up to 2,700 U.S. gpm (615 m³/hr)

Protect commercial/industrial pumps and water systems from surface water organics & debris.

Wherever unprotected pump intakes are threatened by organic debris and other troublesome floating solids, LAKOS ISF Screens provide a continuous, intelligent defense against clogging, lost suction and pump wear. A rugged, reliable internal backwash system blows debris off of and away from the screen, allowing water to flow freely to the pump (see illustration at right).

 

Rivers, effluent ponds, sumps, lakes, re-use pits, streams, tanks, canals, etc.

For centrifugal, turbine and submersible types: Safeguards against damage to impellers and restricted suction/cavitation.

Helps maintain pump efficiency, reducing the need to pump longer to deliver required water volume. Continuously clean screen eliminates potential head/pressure loss.

Continuous cleaning performance means no manual cleaning of stationary screens or routine system shutdowns.

Low-velocity operation keeps fish, mussels, clams, etc. out of pump intakes.

Strong, deep-ribbed, reinforced fiberglass frame. Stainless steel end caps. Choice of corrosion-resistant stainless steel screen mesh or algae growth-inhibiting phospher bronze screen mesh. Turbine drive blades for strong, steady screen rotation.

lakos-1

Lakos Automatic Self-Cleaning Screen Filters

Low-maintenance, high-efficiency, high-flow screen filtration in a compact footprint

Applications:

  • Industrial Water
  • Process Cooling
  • Chill Water
  • Water Treatment
  • Irrigation

Learn More

Flow Rates: 15-7350 GPM
Micron Ratings: 5-500
Maximum Working Pressure: 150 PSI
Total Suspended Solids: 1-100 PPM
Total Dissolved Solids: 1-2000 PPM
Fluid Viscosity: 0.2-20cP
pH: 4-11

Key Benefits

  • Continuous automatic operation, requires no operator intervention, ideal for remote sites.
  • Low water consumption for cleaning, less than 1% of total flow.
  • No interruption of downstream flow during cleaning.
  • Automatic flushing based on pressure-differential, hydraulic and electric control options.
  • Removal of both organic (algae, slime, floating debris) as well as sand, grit and inorganic particles to a fine micron level.
  • Each filter comes complete with housing, screen, flush ball valve, controller and DP switch.
  • ASME, CE, PED available and NSF pending.
  • Intelligently engineered, focusing on wear points to maximize durability and ensure maximum operating hours before required maintenance.
  • Unlike competitive PVC-backed screens, LAKOS screen is fused to stainless steel plate for maximum durability.
  • 304 Stainless Steel Housing and 316 stainless steel screen standard, other materials available upon request.
  • Smart design, resulting in minimal moving parts and easy maintenance.
  • Compact designs allow flexibility in installation position and orientation.
  • Over 140 different models available, each with 20 different screen options to meet any application requirement.

Read Literature

Contact Us Today For Premium Filter and Pump Solutions

We are here to help! Contact us today and experience the SC Industrial Sales difference.

Get a Quote

full-width-cta-image-1