High Pressure Duplex Filter

Maximum Pressure Rating: 5,076 PSI (350 BAR)

Flow Rates up to 16 GPM (60 LPM)

[metaslider id=4001 cssclass=””]

FZD Stainless Steel High Pressure Duplex Filters include an integral change over valve allowing for filter element replacement without shutting the system down. Filters are typically installed directly inline with standard NPT or SAE hydraulic fittings. Filter medias include microglass with stainless steel options.

Standard Features:

Female Threaded Connections up to 3/4″
ßx(c)>1000 Filtration Efficiency
Balancing Valve for equalizing pressures between chambers
Bypass Valve to protect filter elements from collapsing in overpressure situations
Vent Ports to relieve entrapped air
Drain Ports
High and Low Collapse Pressure Filter Element Options
Visual, Electrical and Electronic Differential Pressure Indicators

Specifications

Filter Housing: 316L Stainless Steel

Seals:

NBR (Buna-N): -13°F – 230°F (-25°C – 110°C)

FPM (Viton): -4°F – 250°F (-20°C – 120°C)

MFQ (Silicone): -52°F – 250°F (-50°C – 120°C)

Bypass Valve Setting: 87 PSI (6 BAR) +/- 10%

Available Configurations

Filter Assembly Sizing

Flow Rates (LPM)