|STEAM:||150 psi @ 405°F|
|WOG:||225 psi @ 150°F|
The AB8-150 is the preferred choice for seawater/marine use because of it’s anti corrosive properties. The copper content ensures that marine life cannot adhere to the strainer. This material is also perfect for potable water and meets the Reduction of Lead in Drinking Water (RLDWA) Act (which mandates that the lead content in wetted surfaces is less than 0.25% by weight)
The standard screens are 1/16″ perf 304SS up to 4″ size, and 1/8″ perf above that, for water service. Monel 400 screens are available in most perforation sizes and mesh linings up to 400 mesh.
Manufactured from Cast Aluminum bronze (ASTM B148 Gr. 9D), which is the preferred choice for sea water and other corrosive uses. Aluminum Bronze is also used on potable water applications and it meets lead free requirements.
Tapped NPT, sizes specified below (“C” dimension). Not normally furnished plugged.
INDIVIDUALLY HYDROSTATICALLY TESTED