57 Series Coalescing Filters

Get a Quote

The Chase Filters 57 Series High Pressure Coalescing Tee Type filter is available in Aluminum, Polycarbonate, 316 Stainless Steel and Carbon Steel with Nickel / Chrome Coating.  Flow rates up to 200 SCFM @ 100 psig. With pressure ratings up to 5,700 psig. Filter elements are constructed of two layers of borosilicate microfiber.

57 Series Coalescing Filters Aluminum

Our high efficiency coalescing compressed air & gas filters are designed for versatility. They are 100% machined, completely anodized, one-piece bowl, and a captured Buna-N O-Ring.


C grade element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element.

Coalescing elements should always flow from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates.

The Flow Rates are based upon our 70C grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70C elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

  • Anodized Aluminum Housings
  • Element Size: 0.50” x 1.25”
  • Element P/N 57E-1-70C
  • Flow Rate @100 PSIG: 23 SCFM
Model No.57AP-1-4P-T 57AA-1-4P-P
Bowl MaterialPolycarbAluminum
Port Size¼” ¼”
DrainTwistPetcock
Max. psig150150
Head Diameter1.57″1.57″
Overall Length4.25″4.25″
Weight 0.5 lb. 0.5 lb.
Polycarbonate Housing
  • Polycarbonate
  • Element Size: 0.50” x 2.50”
  • Element P/N 57E-3-70C
  • Flow Rate @100 PSIG: 44 SCFM
Model No.57AP-3-4P-T57AP-3-8P-T57AP-3-4P-A57AP-3-8P-A
Bowl MaterialPolycarb Polycarb Polycarb Polycarb
Port Size¼” ½” ¼” ½”
DrainTwist Twist Automatic Automatic
Max. psig150150150150
Head Diameter2.74”2.74”2.74”2.74”
Overall Length6.50″6.50″6.94″6.94″
Weight 1 lb. 1 lb. 1 lb. 1 lb.
  • Aluminum
  • Element Size: 0.50” x 2.50”
  • Element P/N 57E-3-70C
  • Flow Rate @100 PSIG: 44 SCFM
Model No.57AA-3-4P-P57AA-3-8P-P57AA-3-4P-A57AA-3-8P-A
Bowl Material Aluminum Aluminum Aluminum Aluminum
Port Size¼” ½” ¼” ½”
DrainPetcockPetcockAutomatic Automatic
Max. psig500500250250
Head Diameter2.74”2.74”2.74”2.74”
Overall Length6.50″6.50″6.94″6.94″
Weight 1.5 lb. 1.5 lb. 1.5 lb. 1.5 lb.

CS Grade elements (95% removal against 0.01 micron) are designed for high temperature coalescing applications good to 900°F. Excellent for heavy coalescing. These elements mimic the C grade, only with a silica binder rather than a PVDF one.


The Flow Rates are based upon our 70CS grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70CS elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

  • Black Anodized Aluminum Housings
  • Elements Size: 1.50″ x 6.00″
  • Element Part Number: 57E-5-70CS
  • Flow Rate @ 100 psig: 122 SCFM
Black Anodized Aluminum Housings
Model No.57AA-5-16P-B257AA-5-16P-A57AA-5-16P-B2-257AA-5-16P-A-2
Bowl Material Aluminum Aluminum Aluminum Aluminum
Port Size1” 1”1” 1”
Drain¼” Automatic ¼” Automatic
Max. psig1500250500250
Head Diameter4.09”4.09”4.09”4.09”
Overall Length12.33″12.33″14.58″14.58″
Weight 8.0 lb. 8.0 lb. 8.0 lb. 8.0 lb.
  • Black Anodized Aluminum Housings
  • Elements Size: 1.50″ x 6.00″
  • Element Part Number: 57E-5-70CS
  • Flow Rate @ 100 psig: 122 SCFM
Model No.57AA-7-24P-B2
57AA-7-32P-B2
57AA-7-24P-A
57AA-7-32P-A
57AA-7-24P-B2-2
57AA-7-32P-B2-2
57AA-7-24P-A-2
57AA-7-32P-A-2
Bowl Material Aluminum Aluminum Aluminum Aluminum
Port Size1” OR 2″ 1” OR 2″ 1” OR 2″1” OR 2″
Drain¼” Automatic ¼” Automatic
Max. psig1500250500250
Head Diameter4.09”4.09”4.09”4.09”
Overall Length12.33″12.33″14.58″14.58″
Weight 8.0 lb. 8.0 lb. 8.0 lb. 8.0 lb.
  • Black Anodized Aluminum Housings
  • Elements Size: 2.00″ x 18.75″
  • Element Part Number: 57E-9-70CS
  • Flow Rate @ 100 psig: 354 SCFM
Model No.57AA-9-32P-B257AA-9-32P-A57AA-9-32P-B2-257AA-9-32P-A-2
Bowl Material Aluminum Aluminum Aluminum Aluminum
Port Size2″ 2″ 2″2″
Drain¼” Automatic ¼” Automatic
Max. psig1000250500500
Head Diameter5.51”5.51”5.51”5.51”
Overall Length25.35”25.35”27.60”27.60”
Weight 14.0 lb. 14.0 lb. 14.0 lb. 14.0 lb.
  • Black Anodized Aluminum Housings
  • Elements Size: 1.00″ x 2.50″
  • Element Part Number: 57E-3-70C
  • Flow Rate @ 100 psig: 44SCFM

Temperature Ratings

Model No.57AA-3-8P-P
Bowl Material Aluminum
Port Size½”
DrainPetcock
Max. psig500
Head Diameter2.74”
Overall Length10.38″
Weight 1.5 lb.

57 Series Stainless Steel Coalescing Filters

Series 57T Stainless Steel housings are constructed entirely of 316L stainless steel and are free of welds to comply with NACE MR-01-75. All housings come with Viton Seals and a Coalescing Filter Element.


C grade filter element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element.

Coalescing elements flow direction is from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates.

The Flow Rates are based upon our 70C grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70C elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

  • 316L Stainless Steel Housings
  • Element Size: 0.50” x 1.25”
  • Element Part Number: 57E-1-70C
  • Flow Rate @ 100 PSIG: 23 SCFM
Model No.57T-1-4P-D2
Port Size¼”
Drain¼”
Max. psig5,000
Head Diameter1.42”
Overall Length2.92″
CRNYes
Weight 1.0 lb.
  • 316L Stainless Steel Housings
  • Element Size: 0.50” x 2.25”
  • Element Part Number: 57E-2-70C
  • Flow Rate @ 100 PSIG: 27 SCFM
Model No.57T-2-4P-D2
Port Size¼”
Drain¼”
Max. psig5,000
Head Diameter1.42”
Overall Length3.98″
CRNYes
Weight 1.0 lb.
  • 316L Stainless Steel Housings
  • Element Size: 1.00” x 2.50”
  • Element Part Number: 57E-3-70C
  • Flow Rate @ 100 PSIG: 44 SCFM
Model No.57T-3-4P-D257T-3-8P-D2
Port Size¼” ½”
Drain¼” ¼”
Max. psig1,500 1,500
Head Diameter2.36”2.36”
Overall Length4.80″ 4.80″
CRNYesYes
Weight 2.5 lb. 2.5 lb.
  • 316L Stainless Steel Housings
  • Element Size: 1.00” x 7.00”
  • Element Part Number: 57E-6-70C
  • Flow Rate @ 100 PSIG: 50 SCFM
Model No.57T-6-4P-D257T-6-8P-D2
Port Size¼” ½”
Drain¼” ¼”
Max. psig1,500 1,500
Head Diameter2.36”2.36”
Overall Length9.29″ 9.29″
CRNYesYes
Weight 3.5 lb. 3.5 lb.

CS Grade elements are designed for high temperature coalescing applications good to 900°F. Excellent for heavy coalescing. These elements mimic the C grade, only with a silica binder rather than a PVDF one.

The Flow Rates are based upon our 70CS grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 70CS elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

  • 316L Stainless Steel Housings
  • Element Size: 2.00” x 9.00”
  • Element Part Number: 57E-7-70CS
  • Flow Rate @ 100 PSIG: 198 SCFM
Model No.57T-7-16P-D2 57T-7-24P-D2 57T-7-32P-D2
Port Size1” 1½”2”
Drain¼”¼” ¼”
Max. psig1,5001,5001,500
Head Diameter4.33”4.33″4.52”
Overall Length15.04″15.04″15.83″
CRNYesYesYes
Weight 22 lb. 22 lb.22 lb.
  • 316L Stainless Steel Housings
  • Element Size: 2.00” x 9.00”
  • Element Part Number: 57E-9-70CS
  • Flow Rate @ 100 PSIG: 198 SCFM
Model No.57T-9-16P-D2 57T-9-24P-D2 57T-9-32P-D2
Port Size1” 1½”2”
Drain¼”¼” ¼”
Max. psig1,5001,5001,500
Head Diameter4.33”4.33″4.52”
Overall Length24.49″24.49″24.49″
CRNYesYesYes
Weight 38 lb. 38 lb.38 lb.

57 Series High Pressure Compressed Gas Filter for Alternative Fueling Stations

The 57AFS Series is specially designed for high pressure compressed gas coalescing filtration. These housings are rated for 5,700 PSIG and manufactured to ASME B31.3 specifications. The UHPC–SL Series is machined of carbon steel and completely coated with nickel/chrome plating for rust protection.

The Flow Rates are based upon our 70CS grade disposable coalescing elements in SCFM @ 100 PSIG with an initial 2 PSID. The 57E-SL elements are rated at 95% removal against 0.01 microns. Above each section is the element size.

  • Carbon Steel Housings with Nickel / Chrome Coating
  • Element Size: 1.5” x 6.75”
  • Element Part Number: 57E-SL-70CS (Standard)
  • Flow Rate @ 100 PSIG: 105 SCFM
Model No.57CS-1-16P-4
Bowl MaterialCarbon Steel
Port Size1″
Drain¼”
Max. psig5,700
Head Diameter4.34”
Overall Length12.13″
Weight 26.0 lb.

Get a Quote