AMT Pump

Get a Quote

AMT Pump is A Subsidiary of The Gorman-Rupp Company located in Mansfield, Ohio. AMT Pump offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products.

Virtually every product AMT sells is engineered and designed by the company. Pump components are machined, assembled and tested at the Royersford, Pennsylvania facility.

AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps.

AMT Pump has sold under its own name and under distributor branded names for over 70 years to the largest industrial distributors in the country as well as outside the country. The product line consists of a wide range of electric and engine driven centrifugal and diaphragm pumps in cast iron, bronze, stainless steel and aluminum in addition to a broad array of hand and barrel pumps for industry.  AMT Pump products are included in the Gorman-Rupp OTS™ off-the-shelf pump catalog offering shipment of many products within 24 hours. Virtually every product AMT sells is engineered and designed by the company. Pumps are completely machined, assembled and tested at the Royersford facility. AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps. Nobody sells AMT PUMPS for less!

AMT PUMP QUICK SHIP 

QUICK SHIP PRODUCT
AVAILABLE TO SHIP
WITHIN 24 HOURS FROM
RECEIPT OF PURCHASE ORDER.

Get a Quote
 

Custom Portable Flush Pump

Portable Flush Pump

Custom options available:  http://scindustrialsales.com/portable-flushing-pump

This custom pump solution features an end suction AMT Pump.

Self-Priming Motor Driven Centrifugal Pumps

AMT PUMP Self-Priming Motor Driven Centrifugal Pumps
APPLICATION: Self-priming for water transfer, sprinkler booster, chemical processing and high volume transfer primarily in industrial applications.
CONSTRUCTION: Stainless Steel, Cast Iron, Bronze
or Aluminum
SEALS: Buna-N, Viton® and Silicon Carbide
HORSEPOWER: 1/12 to 15
PORT SIZES: 3/8″ to 4″ NPT; 9.5 mm to 100 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 600 GPM; 135 m3/h
MAX HEAD: 190 Ft. (83 PSI); 6 bar

Self-Priming Sewage Trash Pumps

AMT PUMP Self¬Priming Sewage Trash Pumps
APPLICATION: Solid laden liquids and slurries for construction, agricultural, municipal and industrial applications.
CONSTRUCTION: Cast Iron with Stainless Steel Impeller
SEALS: Silicon Carbide, Buna-N
HORSEPOWER: 3 to 15 TEFC
PORT SIZES: 2″ to 4″ NPT; 50 mm to 100 mm
MAX SOLIDS: 2″; 50 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 510 GPM; 115 m3/h
MAX HEAD: 110 Ft. (48 PSI); 3 bar

Straight Centrifugal Pumps

AMT PUMP Straight Centrifugal Pumps
APPLICATION: Circulation, chemical processing, liquid transfer and cooling for industrial applications.
CONSTRUCTION: Stainless Steel, Bronze or
Cast Iron
SEALS: Buna-N, Viton® or Silicon Carbide
HORSEPOWER: 1/12 to 15, ODP and TEFC,
12 Volt DC
PORT SIZES: 3/8″ to 3″ NPT; 9.5 mm to 75 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 520 GPM; 115 m3/h
MAX HEAD: 190 Ft. (83 PSI); 6 bar

Stainless Steel Corrosion Resistant Pumps

AMT PUMP Stainless Steel Corrosion Resistant Pumps
APPLICATION: High flow and high pressure requirements including chemical processing, liquid transfer, pressure boosting, circulation and containment. Primarily for industrial applications.
CONSTRUCTION: Stainless Steel
SEALS: Viton®
HORSEPOWER: 3/4 to 3
MOTORS: 56J Frame ODP & TEFC
PORT SIZES: 3/4″ to 2″ NPT; 19 mm to 50 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 150 GPM; 34 m3/h
MAX HEAD: 146 Ft. (63 PSI); 4 bar

Heavy Duty Straight Centrifugal & 1750 RPM End Suction Pumps

AMT PUMP Heavy Duty Straight Centrifugal & 1750 RPM End Suction Pumps
APPLICATION: Liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications.
CONSTRUCTION: 300 Series Investment Cast
Stainless Steel, Cast Bronze or Cast Iron
SEALS: Buna-N, Viton® or Optional Silicon Carbide
HORSEPOWER: 2 to 30 TEFC
PORT SIZES: 2″ to 6″ NPT; 50 mm to 152 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 1700 GPM; 380 m3/h
MAX HEAD: 200 Ft. (87 PSI); 6 bar

Pedestal Driven Self-Priming & Straight Centrifugal Pumps

AMT PUMP Pedestal Driven Self-Priming & Straight Centrifugal Pumps
APPLICATION: Straight centrifugal and self-priming models for chemical processing, liquid transfer, pressure boosting, circulation, heating and cooling in OEM applications.
CONSTRUCTION: Stainless Steel, Bronze & Cast Iron, Die Cast Aluminum, Cast Iron
or Polypropylene
SEALS: Buna-N, Viton® or Silicon
Carbide (depending on model)
HORSEPOWER: 3/4 to 15
Required
PORT SIZES: 3/4″ to 4″ NPT;
19 mm to 100 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 630 GPM; 145 m3/h
MAX HEAD: 200 Ft. (88 PSI); 6 bar

Pumps with Explosion Proof Motors

AMT PUMP Pumps with Explosion Proof Motors
APPLICATION: Gasoline, diesel, solvents, clean water, transfer and spraying for construction, agriculture and industrial applications.
CONSTRUCTION: Stainless Steel, Cast Iron, Bronze or Aluminum
SEALS: Buna-N, Viton® or Silicon Carbide
HORSEPOWER: 1 to 10
PORT SIZES: 1″ to 3″ NPT; 25 mm to 75 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 390 GPM; 90 m3/h
MAX HEAD: 170 Ft. (74 PSI); 5 bar
AMT offers 1 HP through 10 HP
Hazardous Duty Xplosion Proof
motors in stock.

Multistage Booster Pumps

AMT PUMP Multistage Booster Pumps

APPLICATION: Typical installations include hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service and fire protection/sprinkler systems, often referred to as “Jockey Pump”.

CONSTRUCTION: 304 Stainless Steel Components with Teflon® Wear Rings and Cast Iron Base Plate/Adapter 

SEALS: EPDM/Tungsten Carbide Seal
HORSEPOWER: 1/2 to 71/2 TEFC Dual Cycle 50/60 Hz
PORT SIZES: 1″ to 11/4″ NPT; 25 mm to 32 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 45 GPM; 10 m3/h
MAX HEAD: 750 Ft. (325 PSI); 22 bar
MAX WORKING PRESSURE: 232 PSI; 16 bar

Coolant/Recirculating Pumps

AMT PUMP Coolant/Recirculating Pumps

Directly Interchangeable with Units Furnished on most Import Machine Tools

APPLICATION: Circulation and spraying of coolants, cutting oils and solutions for industrial and OEM applications.
CONSTRUCTION: Cast Iron and Bronze with Stainless Steel Impeller

HORSEPOWER: 1/25 to 1

PORT SIZES: 3/8″ to 11/2″ NPT; 9.5 mm to 38 mm

MAX TEMP: 180° F; 82°C

MAX FLOW: 56 GPM; 12.5 m3/h MAX HEAD: 60 Ft. (26 PSI); 2 bar

Electric Submersible Pumps

 

AMT PUMP Electric Submersible Pumps copy

APPLICATION: Sewage, flood waters, sumps and pits where waste water must be lifted more than 20 feet or where engines are not suitable. For construction, agricultural, municipal and industrial applications.
CONSTRUCTION: Cast Iron, Stainless Steel,
Aluminum or Polypropylene
SEALS: Double Silicon Carbide
HORSEPOWER: 1/2 to 71/2 or 12 Volt
PORT SIZES: 11/2″ to 4″ NPT; 38 mm to 100 mm
MAX TEMP: 104° F; 40°C
MAX FLOW: 450 GPM; 102 m3/h
MAX HEAD: 90 Ft. (39 PSI); 3 bar
NOTE: BST and 50Hz Options Now Available

Hand Pumps

AMT PUMP Hand Pumps
APPLICATION: Dispensing most liquids and chemicals for industrial applications.
CONSTRUCTION: Cast Iron, Stainless Steel, Ryton®, Derlin®,
Polypropylene, Polyethylene or Aluminum
SEALS: Varies depending on specific model. Consult factory
for complete details on each model available.
TYPES: Rotary, Piston, Hand and Siphon
NOTE: Specifications may vary depending on model.
Consult factory for complete details on each model
available. Liquids must be free of debris and any
solids for proper operation.

Inline Centrifugal Circulator Pumps

AMT PUMP Inline Centrifugal Circulator Pumps
Directly Interchangeable with Bell & Gossett and Other Manufacturers
APPLICATION: Continuous duty for
industrial/commercial HVAC systems.
CONSTRUCTION: Bronze or Cast Iron
SEALS: EPDM Mechanical Seal
HORSEPOWER: 1/4 to 2, ODP, TEFC, and Variable Speed
PORT SIZES: 3/4″ to 3″ NPT; 19 mm to 75 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 150 GPM; 34 m3/h
MAX HEAD: 53 Ft. (23 PSI); 1.5 bar
MAX WORKING PRESSURE: 150PSI; 10 bar
COMING SOON: New Variable Speed HVAC Models

Sprayer/Washer and Universal Oil Coolant Pumps

AMT PUMP Sprayer Washer and Universal Oil Coolant Pumps
APPLICATION: Coolant recirculation, automotive washing machines, parts cleaners, spray booths and cooling towers for industrial and OEM applications.
CONSTRUCTION: Cast iron with Stainless Steel Impeller
Includes Universal Mounting Brackets
HORSEPOWER: 1/8 to 71/2
PORT SIZES: 3/4″ to 11/2” NPT; 19 mm to 38 mm
MAX TEMP: 200° F; 93°C
MAX FLOW: 140 GPM; 31 m3/h
MAX HEAD: 140 Ft. (60 PSI); 4 bar

Industrial Sump Pumps

AMT PUMP Industrial Sump Pumps
APPLICATION: High volume and high head drainage/dewatering. Primarily for industrial applications.
CONSTRUCTION: Stainless Steel, Cast Iron and
Bronze
HORSEPOWER: 1/3 to 3/4
PORT SIZES: 1/2″ to 2″ NPT; 12 mm to 50 mm
MAX COLUMN HEIGHT: 44”; 1.1 meters
MAX TEMP: 200° F; 93°C
MAX FLOW: 103 GPM at
5 Ft. of Head; 23 m3/h (2 PSI) 0.14 bar
MAX HEAD: 30 Ft. (13 PSI); 1 bar

General Purpose & Self-Priming Engine Driven Trash Pumps

AMT PUMP General Purpose & Self-Priming Engine Driven Trash Pumps
APPLICATION: Irrigation, construction, agricultural, industrial, marine, municipal, water transfer and home applications.
CONSTRUCTION: Cast Aluminum and Cast Iron Wearparts
SEALS: EPDM & Silicon Carbide
HORSEPOWER: 5 to 13
ENGINES: Briggs & Stratton or Honda Gasoline or Hatz Diesel
PORT SIZES: 2″, 3″ and 4″ NPT; 50 mm,
75 mm or 100 mm
MAX SOLIDS: 1/4 to 2″; 6 mm to 50 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 540 GPM; 124 m3/h

General Purpose Self-Priming Engine Driven Pumps

AMT PUMP General Purpose Self-Priming Engine Driven Pumps
APPLICATION: Dewatering, irrigation, fertilizer and high pressure for lawn care, utility and contractor applications.
CONSTRUCTION: Cast Aluminum, Cast Iron or Polypropylene
SEALS: Buna-N or Viton®
HORSEPOWER: 2 to 9
ENGINES: Briggs & Stratton or Honda Gasoline
or Hatz Diesel
PORT SIZES: 1″ to 3″ NPT; 25 mm to 75 mm
MAX SOLIDS: 3/32″ to 3/4″; 2 mm to 19 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 300 GPM; 80 m3/h
MAX HEAD: 100 Ft. (43 PSI); 3 bar

Heavy Duty Self-Priming Engine Driven Trash & Dredging Pumps

AMT PUMP Heavy Duty Self-Priming Engine Driven
APPLICATION: High flow applications with solids handling requirements for construction, agricultural, industrial, marine and municipal applications.
CONSTRUCTION: Cast Aluminum or Cast Iron
SEALS: Buna-N, Viton® or Silicon Carbide
HORSEPOWER: 3.5 to 27
ENGINES: Briggs & Stratton or Honda Gasoline
or Hatz Diesel
PORT SIZES: 1″ to 6″ NPT; 25 mm to 152 mm
MAX SOLIDS: 1″ to 3″; 25 mm to 75 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 1,000 GPM; 220 m3/h
MAX HEAD: 121 Ft. (52 PSI); 3 bar

Portable Self-Priming Engine Driven Trash Pumps

AMT PUMP Portable Self-Priming Engine Driven Trash Pumps
APPLICATION: Heavy duty solids handling for excavations, manholes, barge cleaning, sewage bypass and liquid manure for construction, agricultural and industrial applications.
CONSTRUCTION: Cast Aluminum and Cast Iron
SEALS: Viton® / Silicon Carbide
HORSEPOWER: 5 to 13
ENGINES: Honda
PORT SIZES: 2″ to 4″ NPT; 50 mm to 100 mm
MAX SOLIDS: 2″; 50 mm
MAX TEMP: 160° F; 70°C
MAX FLOW: 620 GPM; 140 m3/h
MAX HEAD: 115 Ft. (50 PSI); 3 bar

High Pressure Self-Priming Engine Driven Pumps

AMT PUMP High Pressure Self-Priming Engine Driven Pumps
APPLICATION: Irrigation, washdown, fire protection and jetting in construction, agricultural, industrial, marine, water transfer and home applications.
CONSTRUCTION: Cast Aluminum
SEALS: EPDM or Viton®
HORSEPOWER: 5 to 13
ENGINES: Briggs & Stratton, Honda or Hatz Diesel
PORT SIZES: 2″, 3″ or 3 Way Discharge;
50 mm or 75 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 185 GPM; 42 m3/h
MAX HEAD: 360 Ft. (155 PSI); 10 bar

Engine Driven Portable Fire Pumps

AMT PUMP Engine Driven Portable Fire Pumps
APPLICATION: Irrigation, jetting, washdown and high head pumping for agricultural and fire protection applications.
CONSTRUCTION: Cast Aluminum
SEALS: Carbon/Silicon Carbide
HORSEPOWER: 13 to 23
ENGINES: B&S Vanguard with Exhaust
Prime or Honda Gasoline or Hatz Diesel
with Hand Prime
PORT SIZES: 21/2″ x 11/2″ NPT
and 21/2″ x 21/2″ NPT; 63.5 mm x 38 mm
& 63.5 mm x 63.5 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 270 GPM; 60 m3/h
MAX HEAD: 380 Ft. (165 PSI); 11 bar

Diaphragm Pumps

AMT PUMP Diaphragm Pumps
APPLICATION: Mud, slurry and thick liquids that have the ability to flow for construction, agricultural and marine applications.
CONSTRUCTION: Sand Cast Aluminum
SEALS: Thermoplastic Rubber Diaphragm
ENGINES: Briggs & Stratton, Honda
or Hatz Diesel
MOTORS: TEFC Electric Motor 1PH & 3PH
PORT SIZES: 2″ and 3″ NPT; 50 mm or 75 mm
MAX TEMP: 180° F; 82°C
MAX FLOW: 90 GPM; 20 m3/h
MAX HEAD: 25 Ft. (11 PSI); 0.75 bar

Pump Accessories and Hose

AMT PUMP Pump Accessories and Hose
HOSE: Suction/Discharge Hose with (1) Male & Female NPT Connection; 1″ to 6″ sizes;
25 mm to 152 mm
STRAINERS: Standard and Trash types; 1″ to 6″ sizes;
25 mm to 152 mm
NIPPLE KITS: NPT x NPT and NPT x BSPT
FOOT VALVES: Available in 2″ (50 mm) or 4 for 1 that fits
sizes: 3/4″, 1″, 11/4″ and 11/2″; 19 mm, 25 mm, 32 mm and 38 mm

Get a Quote
Scroll Up